Honeywell HUS-NVR-1032/6032-E User Manual page 41

Adding a Camera
Click in the bottom right corner of the "Devices" list and the "Add Devices" window is
displayed as shown in Figure 5-8
and "Import". "Add" is for adding one designated camera; "Search" is for adding a batch of
designated cameras and "Import" is for importing a file containing parameters of cameras' to
the NVR.
Add
Click "Add" tab in "Add Devices" window and then select "Device Type" and input the "IP
Address", "Port", "User", "Password" and "Camera Name", as shown in the following figure:
Figure 5-8 Add Camera
If you choose "Honeywell 4-Channel Streamer HUSS-E4V" in
"Device Type", you need to select the camera (1-4) from the below
"Camera" dropdown list.
If you want to set stream, PTZ and multicast, click "Advanced Settings" in the above window
and the "Advanced Settings" window is displayed as shown in the following figure:
and there are three tabs in the window: "Add", "Search"
33