Honeywell HUS-NVR-1032/6032-E User Manual page 49

Click OK to eject the disk. If it is the only available disk for recording then the below window
is displayed:
Figure 5-21 Eject
Click OK to stop recording and eject the disk.
Do not directly pull out the disk during the ejection process.
Do not remove the disk while it is still working to avoid losing data
and do not plug in the disk during system start up.
It is recommended that to eject the disk by user interface operation,
otherwise, it will damage the disk or cause data loss.
It is recommended that the ejection interval between two disks is not
less than 30 seconds.
Formatting Disk
To format a disk, right click the disk icon and select "Format" in the pop-up menu and then a
pop-up window is displayed:
Figure 5-22 Format
Click OK and wait until the message pops up indicating it is successful.
Do not directly pull out the disk during the formatting process.
41