Encoder Function - Elation KL FRESNEL 8 FC PO User Manual

ENCODER FUNCTION

When the device has been set to Encoder mode, the lighting display can be adjusted using the knob
located beside the display screen on the back of the device.
To enter Encoder mode, select the ENCODER MODE option from the main system menu, as de-
scribed in the System Menu section of this manual. Then use the UP and DOWN buttons to scroll
through the different modes. Each mode is represented by one of the tables below. Press ENTER to
select the mode that is currently dispalyed.
Once an Encoder Mode has been selected, press the knob to cycle through the available Parameter
options. When the desired Parameter is displayed on the screen, simply turn the knob to adjust the
value of that Parameter.
PARAMETER
Intensity
PARAMETER
Intensity
Color Temperature
Green Shift
PARAMETER
Intensity
Color
Saturation
PARAMETER
Intensity
Strobe
Red
Green
Blue
Mint
Amber
DIMMER MODE
VALUE
Intensity 0-100%
INT CCT GRN MODE
VALUE
Intensity 0-100%
CCT 2400 - 8500K
GRN -100% to +100%
INT COLOR SAT MODE
VALUE
Intensity 0-100%
Virtual Color 1, 2, 3, 4...
Sat 0 - 100%
MANUAL CONTROL MODE
VALUE
Intensity 0-100%
Strobe 0-255
Red 0-255
Green 0-255
Blue 0-255
Mint 0-255
Amber 0-255
17
RESOLUTION DEFAULT
1% 0%
RESOLUTION DEFAULT
1% 0%
100K 6000K
1% Neutral
RESOLUTION DEFAULT
1% 0%
Single Color
1% 100%
RESOLUTION DEFAULT
1% 100%
1
1
1
1
1
1
0
0
0
0
0
0