Encoder Knob - Elation KL FRESNEL 6 CW PO User Manual

E N C O D E R K N O B

ENCODER KNOB

This device features an encoder knob located on the side panel beside the display screen, as
shown in the illustration above.
This knob allows the user to quickly enter Manual Dimmer Mode by pressing on the knob. The
dimming can then be adjusted by turning the knob. To exit Manual Dimmer Mode, use the dis-
play screen control buttons to navigate to "User Mode" in the main system menu, and change
the user mode to another mode.
Additionally, the user can press and hold the encoder knob for 10 seconds to activate full
output for 1 minute. This feature can be used to aid in aiming and/or positioning the fixture,
and overrides any DMX-controlled operations.
22