Table of Contents
Advertisement
GLASS & STONe INSTALLATION
DeCORATIVe GLASS & STONe INSTALLA-
TION
Use caution when handling glass.
1. Remove glass frame using the cam tool supplied with
unit.
NOTe: The unit is designed to use 2/3 of the glass pro-
vided. The remaining decorative glass is intended for
future use.
2. Mix the two (2) bags of decorative glass provided in
the kit as desired. Lay glass on top of burner and cover
burner area with one (1) layer. Glass may be used
around the perimeter next to the wall. Make sure glass
is not blocking gaps between perimeter bracket and the
burner. Keep glass behind retaining flange. Figure 31
Do not cover gap with
decorative glass
Figure 31
20304685
3. Place stones on glass randomly as desired. Figure 29
4. Replace glass frame assembly.
Installation is complete.
NOTe: The glass beads described on Page 24 MAy NOT
be used with the stones. Only one option - glass beads or
stones - may be added on top of the decorative crushed
FP2960
glass.
stone glass
VC41LDVI/VC41CDVI Gas Fireplace Insert
FP2960
25
Advertisement
Table of Contents
