List Calculations; Entering And Storing Lists - Sharp EL-5160S Operation Manual

=
trans matB
mat → list

LIST CALCULATIONS

You can store and calculate
up to four lists of up to
sixteen elements each in
LIST mode.
Press b 5 to enter LIST mode.
Note: You can use the MATH menu in LIST mode to edit,
recall, and store lists, as well as to call list-specifi c
functions.

Entering and Storing Lists

Before performing list calculations, a list must be created.
Follow the steps below to enter and store lists.
1. Press N 2 to bring up the list entry screen.
• Any list data remaining in the buffer, along with any
previously entered, loaded, or calculated list data,
will be displayed.
2. Defi ne the list size (up to sixteen elements) by entering
a value using the number keys and pressing e .
List entry screen (example)
3. Enter each element in the list by entering a value in
the entry fi eld and pressing e .
• Each list element can display up to eight digits (the
decimal point counts as one digit). If an element
exceeds eight digits in length, it will be displayed
in exponent notation within the list.
• A maximum of six elements can be displayed at
one time. Use u , d , l , and r to
move the cursor through the list.
E-57
j N 6 1
N 1 1 =
j N 7
N 3 0
j N 3 1
[
3
1
1 : 1
[
1 : 3
[
List size
Element fi elds
Entry fi eld
]
2
6
2 : 3
]
2 : 2
]