Sharp EL-5160S Operation Manual page 122

Insert and overwrite entry methods
When using the Line editor, you can change the entry
method from "INSERT" (the default) to "OVERWRITE".
After you switch to the overwrite method (by pressing
@ J 4 1 ), the triangular cursor will
change to a rectangular one, and the number or function
underneath it will be overwritten as you make entries.
Name display function
You can save a username in this calculator. When you
turn the power off, the saved username is displayed
momentarily.
Up to 32 characters may be saved, split over two lines.
Entering and editing the username:
1. Press @ J
5 . The editing
screen appears with
a fl ashing cursor.
2. Use u and d
to scroll through the available characters. The
following characters can be entered (listed in the
order that they appear):Letters (A to Z, uppercase
only), numbers (0 to 9), slash (/), hyphen (-),
colon (:), apostrophe ('), comma (,), period (.), and
space ( ).
Press @ u to jump to "A", and press @
d or j to jump to the space.
3. Pressing l or r moves the cursor to the
left or right.
To modify a character, use l or r to move
the cursor to the character, then select another
character using u or d .
Press @ l or @ r to jump to the
beginning of the fi rst line or the end of the second.
4. Repeat steps 2 and 3 above to continue entering
characters.
5. Press = to save.
Note: Press @ Z in the editing screen to clear all
the characters.
E-11