Entering, Displaying, And Editing The Equation; The Writeview Editor - Sharp EL-5160S Operation Manual

ENTERING, DISPLAYING, AND EDITING THE EQUATION

The WriteView Editor

Entry and display
In the WriteView editor,
you can enter and display
fractions or certain
functions as you would
write them.
Notes:
• The WriteView editor can only be used in NORMAL
mode.
• If the equation grows too large, it may extend off the
edge of the display after you obtain the result. If you want
to see the entire equation, press l or r to return
to the editing screen.
Displaying calculation results
When possible, calculation results will be displayed
using fractions, r, and
display will cycle through the following display styles:
• Mixed fractions (with or without
fractions (with or without
• Proper fractions (with or without
• Irrational numbers (square roots, fractions made
using square roots)
Notes:
• In the following cases, calculation results may be
displayed using r:
• Arithmetic operations and memory calculations
• Trigonometric calculations
• In trigonometric
calculations, when entering
values such as those in the
table to the right, results
may be shown using r.
• Calculation results may
extend off the edges of the screen. You can see
those parts by pressing l or r (depending on
whether the left or right portion is hidden).
π
. When you press U , the
π
π
) decimal numbers
π
)
decimal numbers
DEG
RAD
GRAD
) improper
decimal numbers
Entry value
multiples of 15
multiples of
multiples of
⎯
1 π
12
⎯
50
3
E-12