Table of Contents
Advertisement
Using Canon's Specialty Papers
Canon provides several different specialty papers you can use with your
MultiPASS C50.
Printing on High Resolution Paper HR-101
Use the following procedure to load High Resolution Paper HR-101:
1. Open the printer cover by grasping the document guides and lifting.
2. Close the printer cover.
3. Pull the paper rest up until it stops.
4. Load the paper into the sheet feeder as described in "Loading Print Media
5. Raise the output guides as described in "Using the Paper Output Guides with
6. When you are finished printing, remove the remainder of the HR-101 paper
Using the Cleaning sheet (included in the HR-101 package)
The HR-101 package includes a cleaning sheet used to clean the MultiPASS C50
rollers. Use this sheet after printing on 100 sheets (the contents of the package).
1. Remove the covers of the two pieces of tape on the cleaning sheet.
2-50
Setting Up Your MultiPASS C50
Make sure the paper thickness lever is set to the centre. See "Adjusting
the Paper Thickness Lever" on page 2-42.
for Automatic Feed" on page 2-45.
the BC-22/22e and BC-29F Cartridges" on page 2-53.
from the sheet feeder.
Chapter 2
Advertisement
Table of Contents
