Table of Contents
Advertisement
When the document feed lever is set to Manual Document Feed:
Size:
Quantity:
Thickness:
Weight:
Problem documents
Chapter 6
Maximum: 216 mm × approx. 1m
Minimum: 80 × 45 mm
1 page
0.08-0.43 mm
90-340 g/m
To prevent paper jams in the Automatic Document Feeder (ADF), do not use
any of the following in the MultiPASS C50:
WRINKLED OR
CREASED PAPER
CARBON PAPER OR
CARBON-BACKED
PAPER
Remove all staples, paper clips, or any other fasteners before loading the
document into the Automatic Document Feeder (ADF).
Make sure any glue, ink, or correction fluid on the paper is completely dry
before loading the document into the Automatic Document Feeder (ADF).
If you have a document that will not feed into the MultiPASS C50 properly,
make a photocopy of the document, then load the copy instead.
2
CURLED OR ROLLED
PAPER
COATED PAPER
Scanning Documents and Making Copies
TORN PAPER
ONION SKIN OR THIN
PAPER
6-3
Advertisement
Table of Contents
