Hold the BJ cartridge by its sides only. Do not touch the print head, the sharp
edges around the print head, the silver plate on the bottom of the cartridge, or
the silver metal or circuit area on its side.
4. Raise the green cartridge lock lever (on the cartridge holder) by gently
5. Remove and dispose of the old BJ cartridge, or store it in the SB-21 BJ
Chapter 9
PRINT HEAD
pulling up on it.
cartridge container.
DO NOT TOUCH THE GUIDE
RAIL
DO NOT TOUCH THE RIBBON
CABLE
DO NOT TOUCH THE ROUND
SHAFT
DO NOT TOUCH THE GUIDE
RAIL
DO NOT TOUCH THE RIBBON
CABLE
DO NOT TOUCH THE ROUND
SHAFT
Maintaining Your MultiPASS C50
9-13