6. Press START/COPY to begin copying:
If MEMORY FULL appears in the display while you are making multiple copies
of a document, you will not be able to use the multiple copy feature for copying
the document. Instead, you will need to make single copies of the document (as
many times as required). To correct this situation, print out any documents stored
in memory. See page 5-12.
Chapter 6
COPY
To stop copying, press
panel to remove the document. See "Jams in the Automatic Document
Feeder (ADF)" on page 8-6.
If an error occurs during copying, the message START AGAIN appears in
the display, and you will need to reload the document and start copying
again.
(STOP). You may then need to lift the operation
Scanning Documents and Making Copies
6-15