Canon MP360 User Manual page 146

Message
FILE NOT
READABLE
INK TANK
CHANGED?
INSERT PHOTO
CARD
INVALID KEY/
SETTING
LOAD PAPER
MACHINE IN USE
CANNOT TURN OFF
MEMORY FULL
Chapter 11
Cause
There is image data that has
been edited on a computer or
digital camera.
You returned the scan unit to its
original position.
There is no memory card in the
card slot.
An invalid key was pressed or
an invalid setting was selected.
The multi-purpose tray is
empty.
You are unable to turn the
machine OFF with [ON/OFF]
because the machine is
performing an operation.
The machine's memory is full
because you tried to copy too
many pages at once or a very
detailed document.
The image data is too large to
print from your machine.
Action
Check which photographs were not
printed and try reprinting them from
your computer.
If you replaced an ink tank, press
[ ]. If you did not, press [ ].
If you want to photo print from a
memory card, insert one (in a CF
card adaptor as necessary) into the
card slot.
Check the key you want to press or
the setting you want to enter.
Load paper in the multi-purpose
tray. Make sure the stack is below
the paper limit mark.
Press [OK/Set].
The machine is performing an
operation. Wait until the operation
has finished, then turn OFF the
machine.
Divide the document and copy each
part separately.
Print the image data from your
computer.
Troubleshooting
Details
page 87
page 97
page 48
—
page 25
—
—
—
137