You Tried To Create A Multi-Page Pdf, But Were Not Able To Scan Multiple Documents; When You Click A Button On The Mp Toolbox, An Unwanted Application Opens; You Opened The Properties Dialogue Box From The [Scanners And Cameras] Icon And Changed The Settings, But The Settings Were Not Activated (Windows 2000); Changed The Settings, But The Settings Were Not Activated (Windows 2000) - Canon MP360 User Manual

You tried to create a multi-page PDF, but were not able
to scan multiple documents
The ScanGear MP (Advanced Mode) setting in the [Preferences] dialogue
box is incorrect. (Because [Automatically quit ScanGear MP after scanning]
is selected in [Preferences] of Advanced Mode, multiple documents cannot
be scanned.)
If you want to scan additional documents, follow the steps below to deselect [Automatically quit
ScanGear MP after scanning] before scanning.
1. Click a button other than [Settings] on the MP Toolbox. The respective setting dialogue box is
displayed.
2. Select [Use the scanner driver to make advanced settings]. Click [Start] to open ScanGear MP.
3. Click the [Settings] tab, then click [Preferences]. The [Preferences] dialogue box is displayed.
4. Remove the check mark from [Automatically quit ScanGear MP after scanning], then click
[OK]. Scan documents.
When you click a button on the MP Toolbox, an
unwanted application opens
In the MP Toolbox, the application you want to open for that button is not
registered.
Click a button on the MP Toolbox, click [Set] on the screen displayed, and select the application
you want to open for that button. (See Software Guide.)
You opened the Properties dialogue box from the
[Scanners and Cameras] icon and changed the settings,
but the settings were not activated (Windows 2000)
The settings are not activated because you have not restarted your
computer.
Once you have changed your settings, restart your computer.
Chapter 11 Troubleshooting
132