Scanning From An Application Software - Canon MP360 User Manual

Scanning from an application software

You can scan an image from a TWAIN- or WIA- (Windows XP only) compliant application
software and use the image in that application software. This procedure varies depending on the
application software. Only one example is explained here. For the detailed procedure, refer to the
manual of the application software you are using.
1
Load the document on the platen glass. (See page 15.)
2
Start the application software to which you will scan the document and select
the command to scan (such as [Import], [Acquire image], etc.).
3
Select the scanner driver.
• With Windows XP, you can use the ScanGear MP or the WIA driver as the scanner driver.
– When using ScanGear MP, select [Canon MP370] or [Canon MP360].
– When using a WIA driver, select [WIA Canon MP370] or [WIA Canon MP360].
4
If necessary, in the scanner driver dialogue box, preview the scan and make
adjustments. (See Software Guide.)
5
Click [Scan].
• When scanning is completed, the scanned image will appear in the application
software's display area.
Chapter 9
95
Scanning