Installing The Heat Sink - Dell E36S Series Owner's Manual

Figure 50. Installing a processor
1. pin-1 indicator of processor
3. slot (2)
5. socket lever
7. socket
Next steps
NOTE: Ensure that you install the heat sink after you install the processor. The heat sink is necessary to maintain proper
thermal conditions.
1. Install the heat sink.
2. Follow the procedure listed in
3. While booting, press F2 to enter System Setup and check that the processor information matches the new system configuration.
4. Run the system diagnostics to verify that the new processor operates correctly.
Related tasks

Installing the heat sink

on page 89
Installing the heat sink
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should be performed only by Dell
certified service technicians.
1. Ensure that you follow the
2. Keep the Phillips #2 screwdriver ready.
3. Follow the procedure listed in
After working inside your system
Safety instructions.
Before working inside your system
2. processor
4. processor shield
6. socket keys (2)
on page 43.
on page 43.
Installing and removing system components 89