Dell E36S Series Owner's Manual page 51

Steps
1. Disconnect the control panel and USB data cables from the system board.
2. Remove the screws securing the control panel assembly to the system.
3. Slide the control panel assembly upward to release it.
4. Pull the control panel assembly along with the cables out of the system.
Figure 15. Removing the control panel assembly
1. screw (3)
3. control panel assembly guide (2)
Next steps
1. Install the control panel assembly.
2. Install the bezel.
3. Follow the procedure listed in
Related tasks
Removing the bezel on page 45
Installing the control panel assembly
Installing the bezel on page 46
After working inside your system
on page 52
2. control panel assembly
4. control panel assembly guide slot (2)
on page 43.
Installing and removing system components 51