Dell E36S Series Owner's Manual page 93

3. Keep the Phillips #2 screwdriver ready.
Steps
1. Place the PSU in the chassis and slide it toward the back of the chassis.
2. To secure the PSU to the chassis, insert and tighten the screws on the back of the chassis.
3. Connect the power cables to the system board connectors.
Figure 53. Installing the PSU
1. screws (4)
3. release tab
5. P2 power cable
Next steps
Follow the procedure listed in After working inside your system
2. PSU
4. P1 power cable
6. PSU support guide
on page 43.
Installing and removing system components 93