Installing The System Cover - Dell E36S Series Owner's Manual

Figure 8. Removing the system cover
1. slots
3. cover release latch
Next steps
1. Install the system cover.
2. Place the system upright on its feet on a flat and stable surface.
3. Reconnect the peripherals and connect the system to the electrical outlet.
4. Turn the system on, including any attached peripherals.
Related tasks

Installing the system cover

Installing the system cover
Prerequisites
1. Ensure that you follow the
2. Follow the procedure listed in
3. Ensure that all internal cables are connected and placed out of the way and that no tools or extra parts are left inside the system.
Steps
1. Align the tabs on the system cover with the corresponding slots on the system chassis.
2. Lower the system cover onto the chassis until it clicks into place.
44 Installing and removing system components
on page 44
Safety instructions on page 42.
Before working inside your system
2. tabs
4. system cover
on page 43.