Omron HEM-9200T Instruction Manual page 7

• Do not use the device in a moving vehicle (car, airplane).
• Read "What to do if your systolic pressure is more than 210 mmHg" of this
instruction manual, if your systolic pressure is known to be more than 210 mmHg.
Inflating to a higher pressure than necessary may result in bruising where the arm
cuff is applied.
AC Adapter (optional accessory)
• Fully insert the power plug into the outlet.
• When disconnecting the power plug from the outlet, do not pull the power cord.
Be sure to pull from the power plug safely.
• When handling the power cord, take care not to do the following:
Do not damage.
Do not tamper with it.
Do not twist.
Do not pinch.
• Wipe the dust off from the power plug.
• Unplug monitor when not in use.
• Disconnect the power plug before cleaning.
• Use only an OMRON AC adapter designed for this device. Use of unsupported
adapters may damage and/or may be hazardous to the device.
Battery Usage
• Do not insert the batteries with their polarities incorrectly aligned.
• Use only 4 "AA" alkaline or manganese batteries with this device. Do not use other
types of batteries. Do not use new and used batteries together.
• Remove the batteries if the device will not be used for three months or more.
General Precautions
• Do not forcibly crease the arm cuff or the air tube excessively.
• Do not press the air tube while taking a measurement.
• To unplug the air plug, pull on the air plug at the connection with the monitor,
not the tube itself.
• Do not drop the monitor or subject device to strong shocks or vibrations.
• Do not inflate the arm cuff when it is not wrapped around your arm.
• Do not use the device outside the specified environment. It may cause an
inaccurate reading.
• Dispose of the device, components and optional accessories according to
applicable local regulations. Unlawful disposal may cause environmental pollution.
Do not break it.
Do not forcibly bend or pull.
Do not bundle during use.
Do not place under heavy objects.
7