Omron HEM-9200T Instruction Manual page 20

2. Transferring measured data.
As soon as the measurement is completed, the data transfer will start
automatically, as below.
When the connection symbol (
"Data is not being transmitted." in section 4.2 for more detail.
3. After data transfer is completed, press the START/STOP button to
turn the monitor off.
It will automatically turn off after 2 minutes.
Note: Wait 2-3 minutes before taking another measurement. Waiting between
measurements allows the arteries to return to the condition prior to
taking a measurement.
) is not appeared, see
20