Omron HEM-9200T Instruction Manual page 26

Problem
Connecting failure.
Data is not being transmitted.
Cause and Solution
The blood pressure monitor might not be
properly placed within the receiver's
transmission range and is too far from
the receiver. If there are no causes of
data transmission interference found
near the blood pressure monitor, move
the blood pressure monitor within 16 ft.
(5 m) of the receiver and try again.
®
The Bluetooth
turned off. Turn the Bluetooth
on the receiver ON, and try to transmit
the readings again.
The blood pressure monitor did not pair
successfully to the receiver. Try to pair
the devices again. Refer to section 2.
The application on the receiver or
destination device is not ready. Check
the application then try to transmit the
readings again. Refer to section 2. If the
ERR symbol is on the screen after
checking the application, contact your
Telehealth service provider.
26
feature on the receiver is
®
feature