Kyocera ECOSYS P4060DN Operation Manual page 341

Troubleshooting > Troubleshooting
S
Message
SSD error.
Staple is empty.
Staple is empty.
(Manual Staple)
Staple jam.
System error.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-50)
Checkpoints
—
*1
Has the staple cartridge holder
run out of staples?
Has staple cartridge holder A
run out of staples?
—
—
Corrective Actions
An error has occurred on the
SSD. Job is canceled. Select
[End].
The error cords are as follows.
01: The amount of data that can
be saved at once has been
exceeded. Restart the system or
turn the power OFF/ON. If the
error still occurs, divide the file
into smaller files. If the error
occurs after the file is divided,
the SSD is damaged. Execute
[System Initialization].
04: Insufficient space on the
SSD to complete this operation.
Move data or delete unneeded
data.
NOTE
Please be aware that when you
carry out initialization of the
system, the data saved in SSD
will be erased.
If the staples are depleted, the
machine will stop and the
location of staple depletion will
be indicated on the screen.
Leave the machine on and
follow the instructions to replace
the staple case. Select
[Continue] to print without
stapling. Select [Cancel] to
cancel the job.
Add staples to staple cartridge
holder A.
If a staple jam occurs, the
machine will stop and the
location of the jam will be
indicated on the screen. Leave
the machine on and follow the
instructions to remove the
jammed staple.
System error has occurred.
Follow the instructions on the
screen.
10-31
Reference
Page
—
page 10-7
page 10-8
page 10-10
page 10-8
page 10-83
—