Kyocera ECOSYS P4060DN Operation Manual page 247

Setup and Registration (System Menu) > System Menu
Item
Destination
Subject
Log Reset
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login]. For this,
you need to login with administrator privileges. The factory default login user name and login password are set as
shown below.
Login User Name: 6000
Login Password: 6000
Device Log History Settings
[System Menu/Counter] key > [Report] > [Device Log History Settings]
Item
Device Log History
Auto Sending
Destination
Subject
Set the destination to which login histories are sent. E-mail address only can be set as
destination.
NOTE
This function is displayed when "Login History" is set to [On].
Set the subject automatically entered when sending login histories by E-mail.
Value: Up to 60 characters
NOTE
This function is displayed when "Login History" is set to [On].
Resets the recorded login histories.
Select whether to record the device log history.
Value: Off, On
NOTE
If [On] is selected, set the number of histories to be stored. The setting range is 1 to
1,000.
Select whether the device log history is automatically sent to the set address when
the number of entries reaches the number set in "Device Log History".
Value: Off, On
NOTE
This function is displayed when "Device Log History" is set to [On].
Set the destination to which device log histories are sent. E-mail address only can be
set as destination.
NOTE
This function is displayed when "Device Log History" is set to [On].
Set the subject automatically entered when sending device log histories by E-mail.
Value: Up to 60 characters
NOTE
This function is displayed when "Device Log History" is set to [On].
8-28
Description
Description