Kyocera ECOSYS P4060DN Operation Manual page 271

Setup and Registration (System Menu) > System Menu
Item
Sleep Level (models except
for Europe)
Sleep Rules
EnergySaver
RecoveryLevel
Weekly Timer Settings
Weekly Timer
Schedule
Retry Times
Retry Interval
Select the sleep level.
Set the Energy Saver mode to reduce power consumption even more than normal
Sleep mode.
Value: Quick Recovery, Energy Saver
NOTE
This function will not be displayed when the optional Network Interface Kit or Fiery
controller is installed.
Select whether to use the Energy Saver mode for the following functions individually:
• Network
• USB Cable
*1
• ID Card Reader
• Application
Value: Off, On
NOTE
When the machine has entered sleep mode with Energy Saver setting, it does not
wake from sleep mode when it receives print data from a PC connected by USB
cable. Also, the ID card cannot be recognized.
Select the method of recovery from energy saver.
Value:
Full Recovery: This mode enables the use of all functions immediately.
However, this mode saves less energy.
Normal Recovery: In this mode, you can select the method from the following:
enabling the use of all functions immediately or enabling
the use of desired functions only.
If you want to use all functions immediately, select the
[Energy Saver] key to execute recovery.
Power Saving Recovery: This mode enables the use of desired functions only.
Configure settings for switching the machine into Sleep mode and waking it
automatically at a specified time for each day of the week.
Select whether to use Weekly Timer.
Value: Off, On
Specify the time for each day of the week at which the machine enters Sleep mode
and recovers.
Set the number of retry to switch the machine into Sleep mode.
Value: Limited Retries, Unlimited Retries
NOTE
If [Limited Retries] is selected, set the number of retry. The setting range is 0 to 10.
Retry is not performed when "0" is set.
If [Unlimited Retries] is selected, retry is performed until the machine enters Sleep
mode.
Set the retry interval.
Use [-] / [+] to enter a number.
Value: 10 to 60 seconds (increments of 10 seconds)
8-52
Description
This mode saves energy most effectively.