Kyocera ECOSYS P4060DN Operation Manual page 327

Troubleshooting > Troubleshooting
Symptom
2 or more sheets are
overlaps when ejected.
(multi feed)
Printouts are wrinkled.
Printouts are curled.
Printer driver cannot be
installed.
Cannot print.
Checkpoints
―
Is the paper loaded correctly?
―
Is the paper damp?
Is the paper damp?
Is the driver installed with the host
name while Wi-Fi or Wi-Fi Direct
function is available?
Is the machine plugged in?
Is the machine powered on?
Are the USB cable and network
cable connected?
Is the print job paused?
When the wired or Wi-Fi network is
configured using the name
resolution, does the IP address
(private address) of the other
network which can not access
coexists?
Corrective Actions
Load the paper correctly.
Load the paper correctly.
Turn the orientation 180 degrees
around in which the paper is
positioned.
Replace the paper with new paper.
Replace the paper with new paper.
Specify the IP address instead of
the host name.
Plug the power cord into an AC
outlet.
Turn on the main power switch.
Connect the correct USB cable and
network cable securely.
Resume printing.
The number of host name and
domain name which can be used
with the machine is one
respectively. Configure the network
under this restriction.
Change the settings of name
resolution such as NetBEUI and
DNS, or network environment
settings.
Select Wi-Fi, Wired Network or
Optional Network as an unlimited-
use network on Primary Network
(Client).
Set to [Wired Network] or [Wi-Fi]
either one of [On], and set the other
setting to [Off].
10-17
Reference
Page
page 3-2
page 3-4
page 3-4
page 3-4
page 3-4
page 2-41
―
page 2-2
page 2-7
page 7-9
―
Command
Center RX
User
Guide
page 8-45
page 8-37