Kyocera ECOSYS P4060DN Operation Manual page 273

Setup and Registration (System Menu) > System Menu
Item
Developer Refresh
Open toner cover
System Initialization
Display Brightness
Silent Mode
Memory Diagnostics
Calibration
Calibration Cycle
Adjust the printed image that is too light or incomplete, even though there is enough
toner.
Developer Refresh (page 10-35)
NOTE
Waiting time may be longer when the toner is refilled during developer refresh.
Open the toner cover.
NOTE
This function is displayed when using a genuine toner container.
Initialize the hard disk/SSD installed on the machine to return it to the factory defaults.
NOTE
This function will not be displayed when the optional Data Security Kit is activated.
Set the brightness of the touch panel.
Value: 1 (Darker), 2, 3, 4, 5 (Lighter)
Set the Silent Mode. Select this mode when the running noise is uncomfortable.
Value: Off, On
NOTE
When [On] is selected, it may take time for the next print job to start.
Perform this function to check the machine memory.
Calibrate the device to ensure consistency with the original tone.
Calibration (page 10-34)
Set the calibration cycle.
Value:
Short: Priority is given to image quality.
Standard: Balances image quality and print speed.
Long: Priority is given to print speed.
8-54
Description