Operating System - HP HPE ProLiant DL365 Gen10 Plus Server User Manual

Operating system

Operating system
This ProLiant server does not ship with provisioning media. Everything required to manage and install the system software and
firmware is preloaded on the server.
To operate properly, the server must have a supported operating system. Attempting to run an unsupported operating system can
cause serious and unpredictable results. For the latest information on operating system support, see the Hewlett Packard Enterprise
website. website
Failure to observe UEFI requirements for ProLiant Gen10 servers can result in errors installing the operating system, failure to
recognize boot media, and other boot failures. For more information on these requirements, see the HPE UEFI Requirements on the
Hewlett Packard Enterprise website . Hewlett Packard Enterprise website
To install an operating system on the server, use one of the following methods:
Intelligent Provisioning—For single-server deployment, updating, and provisioning capabilities. For more information, see Installing
the operating system with Intelligent Provisioning.
Insight Control server provisioning—For multiserver remote OS deployment, use Insight Control server provisioning for an
automated solution. For more information, see the Insight Control documentation on the Hewlett Packard Enterprise website
For additional system software and firmware updates, download the Service Pack for ProLiant from the Hewlett Packard Enterprise
website. Software and firmware must be updated before using the server for the first time, unless any installed software or components website
require an older version.
For more information, see Keeping the system current .
For more information on using these installation methods, see the Hewlett Packard Enterprise website
Hewlett Packard Enterprise website .
Hewlett Packard Enterprise website .
Hewlett Packard Enterprise
Hewlett Packard Enterprise
Operating system 57