Installing A Hot-Plug Sas, Sata Or Nvme Drive - HP HPE ProLiant DL365 Gen10 Plus Server User Manual

Installing a hot-plug SAS, SATA or NVMe drive

Installing a hot-plug SAS, SATA or NVMe drive
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all drive and device bays CAUTION:
are populated with either a component or a blank.
Procedure Procedure
1. Remove the drive blank:
2. Prepare the drive.
3. Install the drive.
4. Determine the status of the drive from the drive LED definitions .
Installing a hot-plug SAS, SATA or NVMe drive 76