Table of Contents
Advertisement
4. After a few seconds the symbols
and
stop flashing. The appliance
waits for the delay start time.
5. Based on the values set, the appliance
will start a preheating stage of
approximately 10 minutes.
6. It will then proceed with the selected
function.
98
Use
7. At the end of the cooking cycle, "function
ended" appears on the display and a
buzzer will sound that can be
deactivated by pressing the control
knob.
To extend the cooking time
manually, press the control knob
again. The appliance will resume
its normal operation with the
previously selected cooking
settings.
For safety reasons, it is not possible
to set the end of cooking time by
itself without setting the cooking
duration.
Advertisement
Table of Contents
