Connector Type; Figure 6-3. Selecting The Connector Type - ADTRAN DSU III ARdc Manual

Chapter 6. Configuring DTE Options

Connector Type

The C
ONNECTOR
nel connectors is used to connect to the DTE. Figure 6-3 shows the menu
path used to set the connector type. The factory default setting is V.35.
There are no AT commands available to set the connector type.
1=LOCAL
3=CONFIG
2=REMOTE
6-4
T option is used to specify which of the primary chan-
YPE
ENTER ADDRESS

Figure 6-3. Selecting the Connector Type

DSU III ARdc User Manual
1=NETWORK OPT.
2=DTE OPTIONS
3=TEST OPTIONS
4=DIAL OPTIONS
5=MANUAL COMMAND
1=DTE RATE
2=CONNECTOR TYPE
3=DATA FORMAT
4=DTE CMD OPTION
5=TRANSMIT CLOCK
6=CS OPTIONS
7=ANTI-STREAM
8=CD OPTIONS
9=TR OPTIONS
A=SR OPTIONS
61200270L1-20
1=EIA-232
2=V.35