Chapter 5. Configuring Network Options
1=LOCAL
3=CONFIG
2=REMOTE ENTER ADDRESS 3=TEST OPTIONS
Table 5-3 shows the equivalent AT commands used to enable or disable re-
mote configuration.
1=DISABLE
2=ENABLE
Network Type
This option configures the DSU III ARdc for the specific type of network
being used. The factory default setting is D
4 on page 5-5).
5-4
Figure 5-3. Enabling/Disabling Remote Configuration
Table 5-3. Remote Configuration Commands
Front
Panel
Command
DSU III ARdc User Manual
1=NETWORK OPT.
2=DTE OPTIONS
4=DIAL OPTIONS
5=MANUAL COMMAND
AT
&P4
Disable remote configuration
&P5
Enable remote configuration
1=LOOP RATE
2=NETWORK ADDR
3=REMOTE CONFIG. 2=ENABLED
4=NETWORK TYPE
5=CLOCK SOURCE
Description
(see Figure 5-
EDICATED
61200270L1-20
1=DISABLED