Sony HKCU-IP43F Operation Manual page 60

NETWORK
Page name Item
Page No.
<MULTICAST MULTICAST
ADDRESS 4> ADDRESS
N11
INTERCOM OUT
LAN1
(When HKCU-4001 is
installed)
INTERCOM OUT
LAN2
INTERCOM IN LAN1
INTERCOM IN LAN2
<MULTICAST MULTICAST
ADDRESS 5> ADDRESS
N12
META OUT LAN1-1
(When HKCU-4001 is
installed)
META OUT LAN1-2
META OUT LAN1-3
META OUT LAN2-1
META OUT LAN2-2
META OUT LAN2-3
<PING> PORT
N04
IP ADDRESS
N06
PING
(When HKCU-IP43F is
STATISTICS
installed)
N13
(When HKCU-4001 is
installed)
Set value
AUTO, MANUAL
IP ADDRESS 224.0.0.1 to 239.255.255.255,
0.0.0.0
PORT 100 to 65535, 30000
Same as INTERCOM OUT LAN1
IP ADDRESS 224.0.0.1 to 239.255.255.255,
0.0.0.0
PORT 100 to 65535, 30000
SRC IP 0.0.0.0 to 255.255.255.255
Same as INTERCOM IN LAN1
AUTO, MANUAL
IP ADDRESS 224.0.0.1 to 239.255.255.255,
0.0.0.0
PORT 100 to 65535, 30000
Same as META OUT LAN1-1
Same as META OUT LAN1-1
Same as META OUT LAN1-1
Same as META OUT LAN1-1
Same as META OUT LAN1-1
LAN-COM, LAN1, LAN2
0.0.0.0 to 255.255.255.255
EXEC
TRANSMITTED 0 to 5 [packets]
PACKETS
RECEIVED 0 to 5 [packets]
PACKETS
PACKET LOSS 0 to 100 [%]
ROUND-TRIP 0.0 to 1000000.0 [ms]
MIN
ROUND-TRIP 0.0 to 1000000.0 [ms]
AVERAGE
Description
Displays the MULTICAST ADDRESS setting of the
<IP LIVE> page.
Settings for the IP INTERCOM output (LAN1)
Sets the transmit destination multicast IP address.
Sets the transmit destination port number.
Settings for the IP INTERCOM output (LAN2)
Settings for the IP INTERCOM input (LAN1)
Sets the receive destination multicast IP address.
Sets the receive destination port number.
Sets the stream transmit source IP address.
Settings for the IP INTERCOM input (LAN2)
Displays the mode of the multicast address setting of
the IP stream.
Settings for metadata for the IP OUT1 video signal
(LAN1)
Sets the transmit destination multicast IP address.
Sets the transmit destination port number.
Settings for metadata for the IP OUT2 video signal
(LAN1)
Settings for metadata for the IP OUT3 video signal
(LAN1)
Settings for metadata for the IP OUT1 video signal
(LAN2)
Settings for metadata for the IP OUT2 video signal
(LAN2)
Settings for metadata for the IP OUT3 video signal
(LAN2)
Sets the Ping transmit port.
Sets the IP address of the Ping transmit destination.
Sends a Ping.
Displays the Ping execution result.
Number of transmitted packets.
Number of received packets.
Packet loss rate.
Minimum round trip delay time in milliseconds.
Average round trip delay time in milliseconds.
60