Sony HKCU-IP43F Operation Manual page 48

VIDEO/MONITOR
Page name Item
Page No.
<COLOR BAR> HFR CHANNEL
MARK
V01
<BAR CHARACTER> BAR CHARACTER
V02
CLEAR ALL
<DOWNCONVERT> 4K-HD
DOWNCONVERT
V03
FILTER
SD ASPECT
NTSC SETUP
<HFR PAINT OFFSET> DETAIL LEVEL
V04
DETAIL CRISP
<MONITOR> CHARACTER LEVEL
V05
LEVEL GATE
GATE MARKER
Set value
OFF, ON
1, 2, 3, 4, 1(V:0.3), 1(V:0.6)
SQUEEZE, EDGE CROP,
LETTER BOX
7.5, 0 IRE
–99 to 99 0
–99 to 99 0
1, 2, 3, 4, 5
OFF, 1&2, 1, 2, (---)
Y-LEVEL1 MIN 0 to 108% 49
MAX 0 to 108% 61
LEVEL –99 to 99 –25
Y-LEVEL2 MIN 0 to 108% 74
MAX 0 to 108% 108
LEVEL –99 to 99 –25
OFF, ON, (---)
LEVEL –99 to 99 0
Description
Sets channel identification mark superimposition on
HD HFR output video.
See "HFR channel marker" (page 50).
Sets the character string to be displayed on each of
lines 1 to 16.
Clears all the character strings set for BAR
CHARACTER.
Selects the type of filter for downconverting from 4K
video signals to HD signals.
Selects the aspect for SD output.
Sets the NTSC signal setup level.
Sets the offset amount of DETAIL LEVEL to be
added to HD HFR video.
DETAIL LEVEL is the standard for HD normal speed
that is set from the MSU/RCP. 0 is the same as HD
normal speed.
Sets the offset amount of DETAIL CRISP to be
added to HD HFR video.
DETAIL CRISP is the standard for HD normal speed
that is set from the MSU/RCP. 0 is the same as HD
normal speed.
Sets the brightness of text in menus, etc.
Sets level gate display.
OFF: Level gate is not displayed.
1: Displays level gate 1.
2: Displays level gate 2.
1&2: Displays level gate 1 & 2.
(---): Displayed when a camera is not connected.
(Display only)
Sets the minimum detection levels for level gate 1
display.
Sets the maximum detection levels for level gate 1
display.
Sets the zebra display level to be added to the
detection area.
Sets the minimum detection levels for level gate 2
display.
Sets the maximum detection levels for level gate 2
display.
Sets the zebra display level to be added to the
detection area.
Sets the display of the gate signal detected by the
camera.
OFF: Gate signal is not displayed.
ON: Displays zebra in the area (skin gate, etc.)
detected by the camera.
(---): Displayed when a camera is not connected.
(Display only)
Sets the zebra display level to be added to the
detection area.
48