Sony HKCU-IP43F Operation Manual page 39

SYSTEM OPERATION
Page name Item
Page No.
<RETURN> RET1
S06
S08 (When HKCU-IP43F
or HKCU-4001 is
installed)
RET2
RET3
RET4
FRAME
SYNCHRONIZER
SD-RETURN MATRIX OFF, ON
<CHU MODE> CHU MODE
S07
S09 (When HKCU-IP43F
or HKCU-4001 is
installed)
Set value
INPUT SDI IN1,
SDI IN2,
SDI I/O1,
SDI I/O2
[When the HKCU-4001 is installed]
IP RET1,
IP RET2
FORMAT 1080/59.94I(PsF)
INPUT SDI IN2
(same input options as RET1)
FORMAT 1080/59.94I(PsF)
INPUT SDI I/O1
(same input options as RET1)
FORMAT 1080/59.94I(PsF)
INPUT SDI I/O2
(same input options as RET1)
FORMAT 1080/59.94I(PsF)
OFF, ON
HDC4300/HDC-P43,
HDC(HD CUTOUT)
Indication
Sets the return video input signal to display when
RET1 is selected on the camera.
To use the VBS IN 3 input, select SDI I/O1 and set
FORMAT to NTSC or PAL.
To use the VBS IN 4 input, select SDI I/O2 and set
FORMAT to NTSC or PAL.
Sets the format of the input signal selected using
INPUT.
For the supported formats that can be selected for
each BASE FORMAT setting, see "Formats settable
for RETURN FORMAT" (page 46).
Sets the return video input signal to display when
RET2 is selected on the camera.
Same as RET1.
Sets the return video input signal to display when
RET3 is selected on the camera.
Same as RET1.
Sets the return video input signal to display when
RET4 is selected on the camera.
Same as RET1.
Sets the frame synchronizer function for the return
signal.
Sets application of the HD matrix to the SD return
signal.
Sets the camera head to connect.
The unit starts automatically after changing the
setting. Restarting may take a few minutes due to
internal mode change.
HDC(HD CUTOUT): Select to use the cutout
function.
39