Sony HKCU-IP43F Operation Manual page 55

MAINTENANCE
Page name Item
Page No.
<SWITCH ASSIGN> ASSIGNABLE
SWITCH
M09
<OPTION KEY> READ
M10
INSTALLED
OPTIONS
<OTHERS> LASER DIODE ON
BACKUP
M11
RETURN VF
NETWORK menu
NETWORK
Page name Item
Page No.
<IP ADDRESS> IP ADDRESS
N01
SUBNET MASK
DEFAULT GATEWAY 0.0.0.0 to 255.255.255.255
MAC ADDRESS
<CNS SETTINGS> CNS MODE
N02
MCS MODE
CCU NO
MASTER IP
ADDRESS
<TSL UMD> TSL UMD
N03
PORT
PORT NUMBER
PACKET STATUS
Set value
NONE, BARS, CAM POWER,
FORCE LEGACY, LASER DIODE
ON
Execute with ENTER.
ENABLE, DISABLE
NORMAL, HFR LINK
Set value
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
(xx:xx:xx:xx:xx:xx)
LEGACY, BRIDGE, MCS
CLIENT
When MCS is selected in CNS
MODE: Blank, 1 to 96
When LEGACY or BRIDGE is
selected in CNS MODE: Blank, 1
to 96, A to Z
0.0.0.0 to 255.255.255.255
DISABLE, ENABLE
LAN-COM
8900
NOT RECEIVED,
RECEIVED
55
Description
Sets the function to be assigned to the assignable
button on the front panel.
NONE: No assignment.
BARS: Sets the color bar output to ON/OFF.
CAM POWER: Sets camera power to ON/OFF.
FORCE LEGACY: Forces the communication mode
to LEGACY mode.
LASER DIODE ON: Turns the optical signal output
from the CCU to the camera ON/OFF.
Reads the installation key from the USB flash drive.
List of installed options. (Display only)
Sets whether to save the state of the LASER DIODE
setting on the <CAMERA I/F> page of the SYSTEM
OPERATION menu for the next startup.
Sets the VF return signal to the camera.
NORMAL: Normal-speed signal
HFR LINK: HFR signal 1LINK (steady image can be
used as the image to display in the viewfinder)
Description
Sets the IP address.
Sets the subnet mask.
Sets the default gateway.
Displays the MAC address of the unit.
Sets the communication mode.
Indicates that the unit is the client when MCS mode
is selected. (Display only)
Sets the CCU number.
Sets the master device IP address for MCS mode.
Enables/disables IP Tally using TSL UMD V5.0.
Displays the LAN port being used (Fixed to LAN-
COM).
UDP port number for TSL UMD connection
Displays the TSL UMD packet reception status.
When received, it also displays IDs and the on/off
status of the red, green, and yellow tallies.
Up to five IDs can be displayed. "AND MORE" is
displayed if there are more.