Assembly And Initial Set-Up; Step 1. Unpacking & Delivery Inspection - North Star 157114 Owner's Manual

STEP 1. UNPACKING & DELIVERY INSPECTION
STEP 2. ASSEMBLY
STEP 3. INITIAL PUMP & ENGINE PREPARATION
Each of these steps is discussed below:
Find and separate the components identified in Figure 06832 – Unpacking, delivery, inspection, assembly and
initial set-up and Figure 06833 – Hardware Bag. Inspect the pressure washer immediately after you receive
delivery for missing parts and damage.
•
If you have missing or damaged components, contact Product Support at 1-800-270-0810.
High Pressure Hose
Qty-1
799880

Assembly and Initial Set-Up

STEPS FOR ASSEMBLY / INITIAL SET-UP
STEP 1. UNPACKING & DELIVERY INSPECTION
Hardware Bag
Handle Weldment
Qty-1
800080
Pressure Washer
10
Spray Gun
Qty-1
779165
Lance, 18.5"
W/Viton coupler
Qty-1
791278
Fig06832