Assembly And Initial Set-Up; Step 1. Unpacking & Delivery Inspection - North Star 157117 Owner's Manual

STEP 1. UNPACKING & DELIVERY INSPECTION
STEP 2. ASSEMBLY
STEP 3. INITIAL PUMP & ENGINE PREPARATION
STEP 4. BATTERY INSTALLATION
Each of these steps is discussed below:
Find and separate the components identified in Fig157117-3 – Unpacking, delivery, inspection, assembly
and initial set-up and Fig157117-16 – Hardware Bag. Inspect the pressure washer immediately after you
receive delivery for missing parts and damage.
•
If you have missing or damaged components, contact Product Support at 1-800-270-0810.
High Pressure Hose

Assembly and Initial Set-Up

STEPS FOR ASSEMBLY / INITIAL SET-UP
STEP 1. UNPACKING & DELIVERY INSPECTION
Qty-1
799903
Pressure Washer
Hardware Bag
Handle Weldment
10
Qty-1
800118
Lance
Qty-1
777421
Spray Gun
Qty-1
777420
Fig157117-3