Step 1. Unpacking & Delivery Inspection
Step 2. Attaching a Water Feed Tank (customer supplied)
Step 3. Initial Pump & Engine Preparation
Step 4. Battery Installation
Each of these steps is discussed in the below:
Find and separate the components identified in Figure 2 – Overview of Pressure Washer
Components and Figure 3 – Hardware Bag. Inspect the power washer immediately after you
receive delivery for missing parts and damage.
If you have missing or damaged components, contact Product Support at 1-800-270-0810.
Assembly and Initial Set-Up
Steps for Assembly / Initial Set-Up
Step 1. Unpacking & Delivery Inspection
Pressure Washer
(2) Spray Guns and Lances
Figure 2 – Overview of Pressure Washer Components
10
Manual bag
(2) High
Pressure Hoses