STEP 1. UNPACKING & DELIVERY INSPECTION
STEP 2. ASSEMBLY
STEP 3. INITIAL PUMP & ENGINE PREPARATION
Each of these steps is discussed below:
Find and separate the components identified in Fig157115_4 – Unpacking, delivery, inspection, assembly and
initial set-up and Fig06833 – Hardware Bag. Inspect the pressure washer immediately after you receive
delivery for missing parts and damage.
•
If you have missing or damaged components, contact Product Support at 1-800-270-0810.
High Pressure Hose
Qty-1
799880
Pressure Washer
Assembly and Initial Set-Up
STEPS FOR ASSEMBLY / INITIAL SET-UP
STEP 1. UNPACKING & DELIVERY INSPECTION
Hardware Bag
Handle Weldment
10
Qty-1
800080
Spray Gun
Qty-1
779165
Lance, 18.5"
W/Viton coupler
Qty-1
791278
Fig157115_4