Firmware Version (Vers); Factory Reset (Rese) - ESI ESCTP5-RF User Instructions

Firmware version (vErS)

5.11
This function will show the firmware version installed in the unit.
1. Press and hold
dial until display shows vErS then press .
2. The display will show the firmware version.
Press
to return to previous menu.

Factory reset (RESE)

5.12
This function will reset all the parameters to the factory default.
3. Press and hold
dial until display shows RESE then press .
4. The display will show ----, press
5. Once confirmed the unit will load the default parameters,
while the display shows LOAD, when complete it will
return to home screen.
16
until the display shows tInE. Turn the
until the display shows tInE. Turn the
to confirm reset.