Lock (Loc) - ESI ESCTP5-RF User Instructions

5. Press and hold
dial until display shows WIFI then press .
6. The display will be showing ---- and the Wi-Fi symbol will
be flashing, this means it has entered pairing mode.
7. Make sure to select "+ Add New Device" in the APP so
it is also in pairing mode and looking for a "Hot Water"
device.
8. Once the Wi-Fi has successfully paired with the APP, it will
return to the home screen.
Press
to cancel and return to previous menu.

Lock (LOC)

5.10
The unit allows the user to lock the thermostat to the set
parameters.
1. Press and hold
dial until display shows LOC then press .
2. Use the dial to set a PIN code then press
each digit.
3. Use the dial to select the set temperature then
press
To remove the lock, in the home screen press
display to show 0000.
Use the dial to enter the PIN code then press
each digit.
Once the correct PIN has been entered press
return to the home screen.
until the display shows tInE. Turn the
until the display shows tInE. Turn the
to confirm and return to the home screen.
to confirm
or , for the
to confirm
to unlock and
15