Display Illumination (Ligh); Rf Pairing (Rf); Wi-Fi Pairing (Wifi) - ESI ESCTP5-RF User Instructions

Display illumination (LIGH)

5.7
The unit allows for the display to be always ON or to enter
energy saving mode, which will power OFF the display after
being inactive for a few seconds.
1. Press and hold
dial until display shows LIGH then press .
2. Use the dial to select ON or OFF then press
and return to previous menu.

RF pairing (rF)

5.8
This function is only available in the ESCTP5-RF.
The ESCTP5-RF model can communicate wirelessly with
some ESi Controls room thermostats or receivers, which can
potentially grant access and control of the cylinder thermostat
via the ESi Controls Centro APP.
1. Press and hold
dial until display shows rF then press .
2. The display will be flashing COMM, this means it has
entered pairing mode.
3. Make sure the other device being paired is also in pairing
mode.
4. Once the rF has successfully paired with the other device,
it will return to the home screen.
Press
to cancel and return to previous menu.

Wi-Fi pairing (WIFI)

5.9
This function is only available in the ESCTP5-W.
The ESCTP5-W model can communicate wirelessly with the ESi
Controls Centro APP, using your domestic Wi-Fi, which allows
access and control of the cylinder thermostat through the APP.
14
until the display shows tInE. Turn the
until the display shows tInE. Turn the
to confirm