Table of Contents
Advertisement
All manuals and user guides at all-guides.com
5
To use a poll code, enter a 4-digit code (except for
0000), then press the Start/Enter button .
Or,
If you do not want to secure the transmission with a poll
code, press the Start/Enter button when the display
shows 0000 for the poll code. If you previously entered
a poll code, and do not want one, you may enter 0000
then press the Start/Enter button.
6
The display prompts you to store the document in the
WorkCentre Pro 580's bulletin memory.
N
:
If you store the document in the bulletin board
OTE
memory, more than one remote station can poll that
document from your machine. If not, the file will be
automatically erased after being polled by a remote
machine.
7
Press
or
to highlight YES or NO , then press the
Start/Enter button .
To store the document in the bulletin board memory,
select YES. Multiple remote stations can poll the
document from the WorkCentre Pro 580.
If you do not want the document to be stored in bulletin
board memory, select NO. The document will
automatically be erased after being polled by a remote
machine.
8
The machine stores the document in memory. The
display counts the number of pages being stored in
memory and the memory capacity remaining.
The machine returns to Standby mode and the display
shows a reminder that a Polling Transmission is set. The
machine automatically switches to FAX mode (automatic
receiving) when set to be polled.
Fax and Copy Operations
3.53
Advertisement
Table of Contents
