Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Display
MEMORY FULL
The memory is full.
NO ANSWER
The remote machine has
not answered and all the
redial attempts have
been made.
NO. NOT
The one-touch or speed
ASSIGNED
dial location you tried to
use has no number
assigned to it.
NO PAPER
The automatic paper
feeder is empty.
OVER HEAT
The WorkCentre Pro 580
has overheated.
PAPER JAM 0
Recording paper has
jammed in the paper
feeding area.
PAPER JAM 2
Jammed paper still
remains inside the unit.
POLLING ERROR
The remote fax machine
you want to poll is not
ready to respond to your
poll.
Or,
When setting up to poll
another fax machine,
you have used an
incorrect poll code.
6.8
Troubleshooting
Meaning
Either delete unnecessary
documents, or retransmit
after more memory becomes
available, or split the
transmission into more than
one operation.
Try again. Make sure the
remote machine is
operational.
Dial the number manually
with the keypad, or assign
the number to a one-touch or
speed dial location. Refer to
"Automatic Dialing" on page
3.30.
Add paper to the automatic
paper feeder.
Unplug the power cord, wait
until it cools down and plug it
back in. If you cannot solve
the problem, please call
Xerox service.
Press the Stop button and
clear the jam. See page 6.2.
Clear the jam. See page 6.2.
The remote operator should
know in advance that you are
polling and have their fax unit
loaded with the original
document.
Enter the correct poll code.
Solution
Advertisement
Table of Contents
