Xerox workcentre PRO 580 User Manual page 169

All manuals and user guides at all-guides.com
Problem
Page skew • Check the paper type and quality. See "Print Media" on
• Make sure that the paper or other media is loaded
Curl or wave • Check the paper type and quality. Both high
• Turn over the stack of paper in the automatic paper
Wrinkles or creases • Make sure that paper is loaded properly.
• Check the paper type and quality. See "Print Media" on
• Turn over the stack of paper in the automatic paper
Back of printouts • The transfer roller area may be dirty. See "Cleaning
dirty
• Check if the toner is leaking. Clean inside the machine.
Possible Cause and Remedy
page A.7.
correctly and the guides are not too tight or too loose
against the paper stack.
temperature and humidity will cause paper curl. See
"Print Media" on page A.7.
feeder. Also try rotating the paper 180° in the
automatic paper feeder.
page A.7.
feeder. Also try rotating the paper 180° in the feeder.
the Inside" on page 5.7.
See page 5.7.
6.17
Troubleshooting