Maintenance - Mira Go Thermostatic Power Shower Installation And User Manual

Warning! There are no user serviceable components beneath the cover of the
appliance. Only a competent tradesperson should remove the cover.
Before removing the cover the electricity supply must be turned off at the mains and,
if applicable, the appropriate circuit fuse removed. Mains electrical connections are
exposed when the cover is removed.
Before replacing any parts make sure that the underlying cause of the malfunction
has been resolved.
Cleaning
Always read the IMPORTANT SAFETY INFORMATION for your shower.
Cleaning the showerhead
Many household and commercial cleaners, including hand and surface cleaning
wipes contain abrasive and chemical substances that can damage plastics, plating
and printing and should not be used. These finishes should be cleaned with a mild
washing up detergent or soap solution, and then wiped dry using a soft cloth.
It is IMPORTANT to keep the Showerhead and Hose clean and free from blockage
to make sure your shower performs to its optimum. The showerhead MUST be
regularly cleaned and the hose MUST be regularly inspected to ensure there is no
internal collapse or blockage that could reduce the flow.
Use your thumb or a
soft cloth to wipe any
limescale from the
soft nozzles
Warning! Failure to keep the showerhead nozzles clear or inspect the hose for
blockage or internal/external collapse can restrict the flow rate from the shower.
This may cause damage to the shower or result in the temperature delivered to the
user rising to unsafe levels with a risk of scalding. You MUST ALWAYS check the
temperature before using the shower.
1079321-W2-G

MAINTENANCE

Unscrew the hose from
the showerhead and
the shower outlet.
26
Inspect the hose.