Installing The Air Filter; Removing The Main Silencer - Husqvarna TE 150i 2022 Owner's Manual

12.24

Installing the air filter

12.25

Removing the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
SERVICE WORK ON THE CHASSIS 12
–
Clean the intake flange and check it for damage and tight-
ness.
Finishing work
–
Install the air filter.
–
Install the air filter box cover. (
Main work
–
Mount the clean air filter on the air filter support.
–
Grease the air filter in area
Long-life grease (
H02459-01
–
Insert air filter and position retaining pin
The air filter is correctly positioned.
–
Insert retaining tab
Retaining pin
Info
If the air filter is not mounted correctly, dust and dirt
may enter the engine and result in damage.
V00907-10
Finishing work
–
Install the air filter box cover. (
–
Remove screws
–
Pull off the main silencer with exhaust sleeve
spring ring from the manifold.
F02315-10
( p. 71)
p. 69)
A
.
p. 157)
1
in bushing
3
.
2
is secured with retaining tab
p. 69)
1
with the washers.
B
.
3
.
2
and the
71