Preparing The Vehicle For Rides On Wet And Muddy Circuits; Preparing Vehicle For High Temperatures Or Slow Riding - Husqvarna TE 150i 2022 Owner's Manual

8 PREPARING FOR USE
8.7
8.8
36

Preparing the vehicle for rides on wet and muddy circuits

M01106-01
600868-01

Preparing vehicle for high temperatures or slow riding

V00899-01
–
Mount the air filter rain cover.
Air filter rain cover (79006921000)
Info
Observe the fitting instructions for Husqvarna Motor-
cycles technical accessories.
–
Mount the steel sprocket.
–
Clean the motorcycle. (
–
Straighten the bent radiator fins carefully.
–
Check the radiator cap.
Value on the radiator cap
» If the indicated value does not correspond to the setpoint
value:
Warning
Danger of scalding During motorcycle
operation, the coolant gets very hot and is
under pressure.
–
Do not open the radiator, the radiator
hoses or other cooling system compo-
nents if the engine or the cooling system
are at operating temperature.
–
Allow the cooling system and the engine
to cool down before you open the radiator,
the radiator hoses or other components of
the cooling system.
–
In the event of scalding, rinse the area
affected immediately with lukewarm water.
–
Change the radiator cap.
p. 138)
1.8 bar (26 psi)