Samsung SA-N9001 Hardware Manual page 78

Table of Contents

Advertisement

Hardware Guide
12) p.65 Figure 6-2 Shield-can cover update
[2020.04.10 v09]
1) p.30 USB Interface add
[2020.05.06 v10]
1) p.8 Global sku support band updated
2) p.45 Global sku ENDC support band updated
3) p.53 Safety updated
4) CHN, Global sku n79 removed
[2020.07.24 v11]
1) p.21 Pin description change
R11 : NAD2_SPI_MISO / AP2CP_DUMP_NOTI
G8 : AP_CP2_ACTIVE
G10 : Reserved (Not connected, leave open)
2) p.22 H9 : RC Removed
p.23 M30 : EP Removed
3) p.21 3gpp test low temperature revised –20°C ~ +55°C -> –10°C ~ +55°C
4) p.9 7A-7A-66A, 7A-66A-66A, 7A-7A-66A-66A, 7C-66A, 7C-66A-66A, 7A-12A-66A, 7A-12B-66A -> B66 SCC only support
ULCA 8B, 41A-42C, 40D Not offered
[2020.12.01 v12]
1) p.8 NA/CHN/ECE Skew removed
p.9 LTE CA list update : 2A-28A, 4A-28A, 20A-42A, 20A-42A-42A, 32A-42A, 39A-42A, 39A-42C, 39A-42D, 39A-42E, 39C-42A,
39C-42D, 2A-4A-28A, 3A-3A-7A-7A-8A, 3A-20A-42A, 3A-32A-42A, 7A-20A-42A, 20A-32A-42A added
2) p.18 SPI Interface update : Q12, Q10, R11, R9
3) p.37 Data Services update
4) P.66 Label updated
5) p.68 7.2 FCC/IC Regulatory notices added
6) p.40 EN-DC combination removed : NA/CHN/ECE Skew
[2020.12.03 v13]
1) p.68 FCC warning update
© SAMSUNG Electronics Co., Ltd. Confidential & Proprietary
78 / 79

Advertisement

Table of Contents
loading

Table of Contents